Fully Automated Viscoelasticity Analyzer (DMA)

VR-7130

4-1

Fully Automated Viscoelasticity Analyzer (DMA)

VR-7130

Click here for automatic measurement>Go to technical information>

The VR-7130 fully automatic viscoelasticity analyzer (DMA) is a testing machine that thoroughly eliminates the causes of measurement errors and variations by automating tests and adopting a unique temperature sensor.

By combining it with THERMO JETTER, measurements up to -90°C (-100°C as an option) are possible without using liquid nitrogen.

Unlike elastic materials such as metals, polymer materials are viscoelastic bodies. Matter does not deform unless force is applied. In the case of elastic materials such as metals, deformation (response) to applied force (input) occurs simultaneously, while in the case of polymer materials, there is a time lag between input and response. This relationship varies depending on the composition of the specimen to be measured, and also has dependencies on temperature, speed, and amount of deformation. Polymer materials are used in various applications and fields by taking advantage of these differences.

Since these characteristics are often treated as material properties, it is common to measure reactions (deformation when force or deformation) is applied (deformation when force is applied, force when deformation is applied), and testing machines that can reduce the accuracy of testing machines and errors on experimenters are desired.

The viscoelasticity analyzer (MODEL: VR-7130) is a testing machine designed to thoroughly eliminate the causes of errors and measurement variations in measurement in order to measure the viscoelasticity of polymer materials.

  • Fully automated operation of up to 100 specimens is possible
  • By fully automating specimen chucking, measurement, and ejection, errors caused by the measurer are thoroughly eliminated
  • More accurate temperature measurement is possible by adopting a step heating system and rubber-coated thermocouples
  • Resolve the temperature difference between the sample temperature and the temperature sensor by using a thermocouple with a rubber coating of the same thickness as the sample for the temperature sensor and using a step heating method as the heating method
  • By adopting a piezoelectric load cell, more accurate load measurement is possible
  • Since viscoelasticity measurements measure minute deformations such as a few μm to tens of μm, the rigidity (deflection) of each component affects test results. This testing machine uses a highly rigid piezoelectric load cell
  • Eliminates effects such as housing resonance due to compactness
  • Highly accurate measurements are possible between test areas (0.1 to 200 Hz) (excluding natural vibrations of the sample)
  • By adopting THERMO JETTER, it is possible to test at low temperatures up to -90°C (-100°C as an option) without using liquid nitrogen
  • Measurement accuracy is improved by directly calculating the phase
  • Master curves can be created (optional)
  • By increasing the maximum frequency and maximum load compared to conventional models, it is possible to measure a wide range of viscoelastic properties
  • Frequency: 0.1 ~ 200Hz (continuously variable)
  • Max load: 200N (when load cell ± 450N)

utilise
Simulate product characteristics with test pieces
  • Tire wear/friction/rolling resistance/heat generation, etc. Car ride comfort/anti-vibration performance/noise, other anti-vibration/damping/sealing performance... etc.
  • Molecular structure/degree of deterioration, etc.

Test items
  • Fixed-point measurement
  • Temperature dispersion test
  • Frequency dispersion test
  • Strain dispersion test

Measurement items
  • Absolute complex elastic modulus [E ✽]
  • Storage Modulus E'
  • Loss Modulus E”
  • loss tangent tandelta

specifications
項目 仕様
名称 全自動粘弾性アナライザ
型式 VR-7130
試験片形状 短冊状試験片 40 (L) ×4 (W) ×2 (t) mm
試験方式 引張方法
試験片搬送装置 最大100個
チャック間距離 20mm(オプション10mm)
荷重検出 (1) 荷重検出器:圧電式ロードセル(定格±45N または ±450Nを選択)
(2) 最大荷重:200N(ロードセル±450Nの時)
(3) 分解能:1%F.S.
変位検出 (1) 変位検出器:光ファイバ非接触式微小変位計
(2) 最大変位:1,000μm
(3) 分解能:0.3μm
加振 (1) 加振機:電動加振機(チャック下側加振)
(2) 加振波形:正弦波
(3) 加振周波数:0.1~200Hz 連続可変
(4) 加振振幅:±0.1~±2.5%(40~1,000μm p-p)連続可変
初期伸展 (1) 加振機:電動加振機による下部チャック移動
(2) 初期伸展方式:定荷重方式(変位直接測)方式
(3) 伸展量:0μm~2,000μm
恒温槽 構造:左右自動開閉方式
試験温度 -90~200℃(オプション:-100℃対応<液体窒素不要>)
安全装置 (1) 非常停止スイッチ
(2) 過昇温防止機構
(3) エア圧力スイッチ
(4) 漏電遮断機
外部通信 (1) 試験機本体制御:USB
(2) 温度制御:RS-232C(D-SUB 9pin)
ユーティリティ (1) 試験機本体:電源 AC100V 単相 2kVA 乾燥空気 0.4MPa
(2) サーモジェッター:電源 AC200V 三相 4kVA 乾燥空気 0.5MPa
流量 250L/min(大気圧換算)
使用環境 (1) 温度:5~40℃
(2) 湿度:35~80%RH
寸法 本体及び恒温槽:約470(W)×470(D)×1320(H)mm
サーモジェッター:約510(W)×740(D)×1110(H)mm
付属品 荷重校正用ループパス、標準工具、各機器接続ケーブル
options
  • Master curve software
  • Temperature/strain dispersion test, temperature/frequency dispersion test
  • Replaceable specimen punching blade

We also accept inquiries about special orders, etc.

For details, please contact us from “Inquiries about new products”.

Tel. 042-572-1397 (Monday to Friday 9 a.m. to 5 p.m.)

Fax. 042-573-1520

Inquiring

Q & A

FAQs
What are the prices and commercial flow when it comes to purchasing products?

Please contact us from “Contact Us” on our website.

Can I do direct transactions?

Direct transactions are also possible; please contact us from the “Contact Us” section on the website for details.
☏ 042-572-1397 (Monday to Friday 9 a.m. to 5 p.m.)

What should I do if there is a device malfunction or trouble?

Please contact us from “Contact Us” on our website.
✉ service-desk@ueshima-seisakusho.com
☏ 042-577-1363 (Monday to Friday 9 a.m. to 5 p.m.)
6-5-22 Yaho, Kunitachi-shi, Tokyo, 186-0011

Regarding the warranty period?

We have set a guarantee period of 1 year from the inspection date. (Consumables are not included)
Details will be provided separately when the device is delivered.

I want a catalog, what should I do? 

Please download from “Click here to download the catalog” on each product page on our website.

Do you support overseas sales?

Yes, it is compatible. We have sales agents in the US, China, South Korea, Taiwan, India, Indonesia, Thailand, Vietnam, Malaysia, and Europe.    
For details, please contact us from the “Contact Us” website.

Is contract sample measurement possible for a fee?

This is possible depending on the device; please contact us from “Contact Us” for details.

Can I demonstrate the device?

This is possible depending on the device; please contact us from “Contact Us”.

Contact

We're here to help. For more information about our products and services, please fill out the form on the right.

042-572-1397 (Monday to Friday 9 a.m. to 5 p.m.)

Contact

For orders for repairs, calibrations, and services, please contact us using the contact details listed below.

service-desk@ueshima-seisakusho.com
042-577-1363 (Monday to Friday 9 a.m. to 5 p.m.)
6-5-22 Yaho, Kunitachi-shi, Tokyo, 186-0011
Thanks! Your submission has been received!
Oops! Something went long while appearing the form.